Covid-19
Reward Points
KamRacing.co.uk
Reward Points / Fast Global Delivery
Covid-19

BC Racing BR Series Coilovers - VW Caddy (Mk3, Mk4 2K)

Availability: In stock

From: Excl. Tax: £674.25 Incl. Tax: £809.10

To: Excl. Tax: £743.58 Incl. Tax £892.30

Incl. Tax: £0.00 Excl. Tax: £0.00

Add Items to Cart
10% OFF RRP
    • Purchasing this item will earn you 1618 reward points (Reward point(s) £16.18) !
    • Applies only to registered customers, may vary when logged in.

* Required Fields

Incl. Tax: £0.00 Excl. Tax: £0.00

Add Items to Cart

Be the first to review this product

This BR Series coilover kit fits both the Mk3 and Mk4 Caddy vans and comes complete with a choice of either rose jointed pillowball front top mounts (Type RA kit) or rubber versions (Type RS kit). There is also an extra low version of this coilover which will lower the front an extra 25mm, making the maximum lowering amount 95mm. The VW Caddy BC Racing Coilovers come as a full set - front coilover units with the rear damper and shackles to lower the back.

  • 30 way adjustable damping - combined rebound and compression
  • Height adjustment via bottom mount to retain full damper travel
  • Large Diameter Monotube Damper Body (Nitrogen Filled)
  • Adjustable spring platform for corner weighting
  • Integrated bearing in top hat, improving steering feel
  • Custom Spring rates * made to order on request

Please note we are unable to ship the BC Racing range to the following countries: France, The Netherlands, Finland, USA & Canada, China, Singapore, Taiwan, Japan, Malaysia, South Africa, Australia. If your country of residence is on this list then you have a local distributor. Please direct all enquiries to them. They will be able to get the complete BC Racing range.

BC Racing's most popular coilover setup; the BR series coilovers; are a fantastic choice for road driving or tarmac circuit use. BC have made it easy to access the adjustment knobs for tweaking the compression and rebound damping to suit whatever driving conditions you encounter. The BC Racing BR Coilovers have a clever ride height adjustment which does not affect spring preload and allows full damper travel at any ride height. By moving the whole damper body up or down in the hub bracket, ride height is adjusted without moving the spring platform. Unlike many of the other manufacturers the BR Series kits usually come with top mounts included. These mounts are either rose jointed pillowball mounts or rubber mounts depending on the type of kit available for the car.

BR Series
Front Coilover
Rear Coilover
Type RS
Inc Rubber Top Mount
Inc Rubber Top Mount
Type RA
Inc Pillowball Top Mount
Inc Rubber Top Mount / Non Top Mount
Type RH
Inc Pillowball Top Mount
Inc Pillowball Top Mount / Non Top Mount
Type RN
Without Top Mount
Inc Rubber Top Mount / Non Top Mount

BC Racing BR Series Features

46mm diameter pistons / 53mm diameter damper body

The BC Racing BR series coilovers are similar to the V1 series coilover kits but use a larger 46mm diameter piston in a 53mm diameter damper body to maximise the oil capacity. the larger outer shafts also give additional strength enabling them to cope with higher side loads.

Rebound & Compression Damping Adjustment

BC Racing BR Coilovers have 30 clicks of rebound and compression damping adjustment allowing simple adjustment of the way your vehicle handles; fine tuning the front and rear balance to suit different track and race disciplines.

Standard Features of all BC Racing Coilovers

Ride Height Adjustment

BC Racing Coilovers alter ride height using an adjustable bottom mount. As ride height is set by this bottom mount rather than the spring platform your BC Racing Coilover retains full damper travel no matter what your ride height. This also allows the BC Racing Coilover spring pre-load to be set independently.

Nitrogen pressurised Monotube Coilovers

The BC Racing coilover kits use Nitrogen pressurised Monotube dampers with a large diameter pistons and bodies. Mono-tube pistons are much larger than twin-tube coilover dampers. This allows it to be more sensitive to small suspension movements. The larger outer shafts are stronger so they cope with higher side loads. These increased lateral loads occur when stick tyres are used or when a car may go airborne over crests in the road at high speed. Nitrogen pressurised Monotube coilover dampers give a more consistent damping performance and do not suffer from aeration or performance fade in comparison to a twin tube BC Racing Suspensiondamper design.

Corner weight adjustment

The lower spring platforms of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.

The car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.

Corrosion protection

The BC Racing Coilover damper units are black chromed steel to give superb durability against the weather and road salt in winter. The aluminium components are anodised and the steel lower mounts go through an electrocoating process followed by powder coating.

Top mounts included on most kits

Many of the BC Racing coilover kits come with complete with replacement top mounts. These BC Racing top mounts are either rose jointed (pillowball) top mounts or rubber top mounts. The anodised alloy top mounts eliminate any flex or play associated with the standard rubber top mounts, improving response and handling. In addition some of the BC Racing coilover kits also allow for camber / castor adjustment through the solid top mounts to give additional tuning flexibility.

Additional Information

Car Marque Volkswagen (VW)
Manufacturer BC Racing
Model Part Number Type RA: RA-H-41
Type RS: RS-H-41
Car Model VW Caddy Mk3 / mk4 (2K)
Damper Design Mono-tube
Material of coilover strut black chromed steel
Suspension Type (Front) height adjustable threaded coilover strut
Spring Rate (Road) Front: 7kg/mm

Customer Reviews

No reviews have been found

Write Your Own Review

You're reviewing: BC Racing BR Series Coilovers - VW Caddy (Mk3, Mk4 2K)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Service
Price
Quality

View more products from the range

Please wait...