You have no items in your shopping basket.
The Cat Cams 7606512 camshaft set is designed for fast road and track day use and fits the VW Polo Mk4 6N chassis and Mk5 6N2 models with the AFH 1.4 16v engine. This Cat Cams camshaft are a direct replacement for the standard camshafts. This camshaft set is easy to fit using standard timing marks.
The 7606512 camshafts can be used with OE followers, retainers and valve springs as well as the standard inlet manifold, but requires an ECU remap to ensure correct fueling & ignition timing. Cars using these camshafts will have a steady idle and good emissions for MOT time.
Cat Cams are one of the most innovative camshaft manufacturers currently on the market with successes in European Touring Cars (including BTCC class winners), the Le Mans 24 hours and Moto GP. Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has the solution. Based in Belgium, for over 15 years Cat Cams has engineered a vast range of performance cam profiles.
Cat Cams pursue a unique design philosophy based on shorter durations and higher valve lifts. Their profiles offer better cylinder filling at lower engine speeds, producing higher levels of torque and tractability allied to improved top end power when compared to their competitors.
Cat Cams never re-profile camshafts; All Cat Cams camshafts are made fresh from either chilled castings or steel billet blanks.
|Model Part Number||N/A|
|Car Model||Polo Mk4 (6N) Mk5 (6N2) 1.4 16v 100hp|
|Year of Manufacture||No|
|Application||Hydraulic: Sport Camshaft (Fast Road / Trackday)|
|Duration [0.1mm+cl]||INTAKE 255° , EXHAUST 247°|
|Duration [1.0mm + cl]||INTAKE 223° , EXHAUST 215°|
|Clearance [cl]||INTAKE 0.00mm , EXHAUST 0.00mm|
|Peak Angle||INTAKE 110° , EXHAUST 106°|
|Valve Train||INTAKE 10.10mm, EXHAUST 9.50mm|
|Maximum Lift [cl=0]||INTAKE 1.10mm , EXHAUST 1.10mm|
|Timing [1.0mm + cl]||INTAKE 1/42° , EXHAUST 34/ 1°|